REV'IT!
Tracker Men's Brown Leather Motorcycle Gloves
with Knuckle Protection
Looking to become the next classic in the REV'IT! collection, the Tracker motorcycle gloves are here to stay. These short-cuffed hand protectors are your next best friends when you’re looking for a vintage vibe without sacrificing safety. The rusted cowhide outer shell gives them their rugged look, while still offering that supple feeling you’re looking for in a summer leather motorcycle glove.
They are partially ventilated and there is protection on the fingers, knuckles, and palm. They’re offered in black and brown to make sure they fit every leather jacket out there.
Match safety with style thanks to the Tracker motorcycle gloves.
- Goatskin drum-dyed leather & water resistant suede outer
- Tri-fleece liner
- Hard shell knuckle
- PWR|Shield at palm
- Temperfoam® finger knuckles
- Temperfoam® palm slider
- Adjustment tab at cuff
- Hook-and-loop closure
- Leather connect fingertip
- Conductive fingertip at index finger & thumb
- Pre-curved fingers
- Short cuff
- Ventilation holes
- Level 1 KP certified - according to the EN 13594:2015 standard
- Drum dyed goatskin - this goatskin has been drum dyed to give a garment or product a maximum penetration of dye throughout the hide
- Leather Connect Finger Tip - never remove your gloves to answer your phone or use your navigation system again. The connect fingertip leather has been developed specifically to operate touch screens
- Tri-fleece liner - this polyester tricot fabric is used for glove lining, and brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp.
- PWR|shield knit - created with a unique knit technique which results in a fabric with unsurpassed cut, tear and abrasion resistance level. This product is equipped with PWR|shield at the palm for extra safety in case the palm of the hand comes in contact with the asphalt
- Temperfoam® - self-contouring foam that is not CE-approved, but still offers a great number of impact-resistant properties, this product is used in areas where mobility and fit are a must
- Adjustment strap at wrist - The hook-and-loop adjustment strap at the wrist allows for optimum adjustability and fit when using our gloves. Find the ideal tightness and comfort every time it is used
REV'IT!
Men's Tracker Motorcycle Gloves
SIZE | HAND CIRCUMFERENCE |
HAND LENGTH |
---|---|---|
S | 19.4 - 20.6 cm | 19.4 - 19.8 cm |
M | 20.7 - 21.9 cm | 19.9 - 20.3 cm |
L | 22.0 - 23.1 cm | 20.4 - 20.8 cm |
XL | 23.2 - 24.4 cm | 20.9 - 21.3 cm |
2XL | 24.5 - 25.7 cm | 21.4 - 21.8 cm |
3XL | 25.8 - 27.0 cm | 21.9 - 22.3 cm |
REV'IT Leather
Care Instructions
To keep your leather REV’IT! gear in top condition, it is key to clean frequently after use. This way dirt & the occasional insect cadavers don’t build up over time.
Hot Tips: Always use a clean cloth & some lukewarm water to remove all dirt on the surface of your leather gear. Air your leather gear out after each use. Only dry at room temperature after cleaning, never in direct heat sources or light. Don’t store your leather garments in an airtight plastic bag or container. Never use cleaning products that contain bleach, solvents or other chemical products. Always refer to care labels on the garment, this is leading over any other instructions givenNever wash or dry clean leather
"Everything you do, you do with passion and conviction. Just like us. You’re the type of person who appreciates good product design; products that perform and live up to the highest expectations. If you are that type of person, you’ve just discovered the brand that suits your personality..."
Free shipping on orders over $250.
Flat rate shipping of $8 for all other orders.
Orders sent within 2-4 business days.
Shipping rates are calculated at the checkout.
Delivery will typically arrive within 10-14 business days to metro areas.
R E T U R N S . P O L I C Y